 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CD43__60 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts TM OUTLINE DRAWING A C F G H "T" Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. CD43__60 Dual SCR Isolated TM POW-R-BLOK Module 60 Amperes / Up to 1600 Volts 2 3 B 76 K 1 45 J "U" THREAD "S" FASTON TAB L R D M N P Q Features: T T T T T Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Glass Passivated Chips DBC Alumina (Al2O3) Baseplate Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) 4 5 2 7 6 ~ 1 + CONNECTION DIAGRAM - 3 Benefits: CD43 Outline Dimensions Dimension A B C D F G H J K L M N P Q R S T U Inches 3.62 0.81 3.15 1.18 0.59 0.79 0.79 0.16 0.23 0.61 1.14 0.24 0.94 1.18 0.71 0.11 x .03 0.25 M5 Millimeters 92 20.5 80 30 15 20 20 4 5.8 15.5 29 6.1 24 30 18 2.8 x 0.8 6.3 M5 Ordering Information: Select the complete eight digit module part number from the table below. Example: CD431660 is a 1600Volt, 60 Ampere Dual SCR Isolated TM POW-R-BLOK Module T No Additional Insulation Components Required T Easy Installation T No Clamping Components Required T Reduce Engineering Time Type CD43 Voltage Volts (x100) 08 12 16 Current Amperes (x 1) 60 Applications: T T T T T T T T Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only Revision Date: 11/1/2001 CD43__60 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts TM Absolute Maximum Ratings Characteristics Repetitive Peak Forward and Reverse Blocking Voltage Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 180 Conduction, TC=95C 180 Conduction, TC=95C (AC Switch) 180 Conduction, TC=95C 60 Hz, 100% VRRM reapplied, Tj=125C 60 Hz, No VRRM reapplied, Tj=125C 60 Hz, No VRRM reapplied, Tj=25C 50 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, No VRRM reapplied, Tj=125C 50 Hz, No VRRM reapplied, Tj=25C Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, 100% VRRM reapplied, Tj=125C Peak Ten Cycle Surge Current, Non-Repetitive I t for Fusing for One Cycle, 8.3 milliseconds 2 Conditions Symbol VDRM & VRRM VRSM IT(RMS) IT(RMS) IT(AV) ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM It It It It It It di/dt 2 2 2 2 2 2 Units up to 1600 VRRM + 100 95 135 60 1,470 1,740 1,940 1,400 1,665 1,850 1,120 1,080 900 870 8,960 12,560 15,600 9,800 13,860 17,110 150 2 2 2 2 2 2 V V A A A A A A A A A A A A A A sec A sec A sec A sec A sec A sec A/s 60 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, 100% VRRM reapplied, Tj=125C 8.3 ms, 100% VRRM reapplied, Tj=125C 8.3 ms, No VRRM reapplied, Tj=125C 8.3 ms, No VRRM reapplied, Tj=25C 10 ms, 100% VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Gate Power Dissipation Average Gate Power Dissipation Peak Forward Gate Current Peak Reverse Gate Voltage Operating Temperature Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together Tj=25C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5s, tp > 6s Tp < 5 ms, Tj = 125C F = 50 Hz, Tj = 125C Tp < 5 ms, Tj = 125C Tp < 5 ms, Tj = 125C PGM PG(AV) IGFM VGRM TJ Tstg 12 3 3 10 -40 to +125 -40 to +125 25 3 44 5 83 3 W W A V C C in.-Lb. Nm in.-Lb. Nm g oz. V V 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second Vrms Vrms 2500 3500 Revision Date: 11/1/2001 CD43__60 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts TM Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Peak On-State Voltage Threshold Voltage, Low-level Slope Resistance, Low-level Threshold Voltage, High-level Slope Resistance, High-level VTM Coefficients, Full Range Symbol IDRM IRRM V TM / VFM V(TO)1 rT1 V(TO)2 rT2 Test Conditions Up to 1600V, TJ=125C Up to 1600V, TJ=125C ITM / IFM =235A TJ = 125C, I = 16.7% x IT(AV) to IT(AV) TJ = 125C, I = IT(AV) to ITSM TJ = 125C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt Turn-Off Time (Typical) dV/dt t off Linear to 2/3 VDRM Tj=125C, Gate Open Circuit TJ = 25C, IT= 2A Vr = 50V, -dI/dt=10 A/s Re-Applied dV/dt = 200 V/s, Linear to 900 V Tj= -40C, VD=6V, Resistive Load Tj= 25C, VD=6V, Resistive Load Tj=125C, VD=6V, Resistive Load Tj= -40C, VD=6V, Resistive Load Tj= 25C, VD=6V, Resistive Load Tj=125C, VD=6V, Resistive Load Tj=125C, VD=VDRM Tj=125C, VD=VDRM VD=6V, Resistive Load, Gate Open VD=6V, Resistive Load A= B= C= D= 500 40 - 100 (Typical) Min. Max. 15 15 1.59 0.82 3.00 0.85 2.90 0.8127 5.23E-03 2.90E-03 -9.17E-05 V/s s Units mA mA V V m V m Gate Trigger Current IGT 270 150 80 4.0 2.5 1.7 0.25 6 200 400 mA mA mA Volts Volts Volts Volts mA mA mA Gate Trigger Voltage VGT Non-Triggering Gate Voltage Non-Triggering Gate Current Holding Current Latching Current VGDM IGDM IH IL Thermal Characteristics Characteristics Thermal Resistance, Junction to Case DC Operation Thermal Impedance Coefficients Symbol RJ-C ZJ-C Per Module, both conducting Per Junction, both conducting ZJ-C= K1 (1-exp(-t/1)) + K2 (1-exp(-t/2)) + K3 (1-exp(-t/3)) Thermal Resistance, Case to Sink Lubricated RC-S + K4 (1-exp(-t/4)) Per Module K1 = 2.68 E-3 K2 = 9.52 E-3 K3 = 1.26 E-1 K4 = 2.01 E-1 Max. 0.165 0.330 1 = 3.10 E-5 2 = 1.07 E-3 3 = 2.02 E-2 4 = 1.39 E-1 0.1 C/W Units C/W C/W Revision Date: 11/1/2001 CD43__60 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 60 Amperes / Up to 1600 Volts TM Maximum On-State Forward Voltage Drop ( Tj = 125 C ) 4 3.5 0.40 0.35 Maximum Transient Thermal Impedance (Junction to Case) On-State Voltage - Vtm - Volts Thermal Impedance - Rjc - C/W 3 2.5 2 1.5 1 0.5 0 10 100 1000 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0.001 0.01 0.1 1 10 100 Instantaneous On-State Current - Itm - Amperes Time - t - Seconds Maximum On-State Power Dissipation (Sinusoidal Waveform) 80 70 120 90 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 55 60 Average On-State Current - It(av) - Amperes 0 180 360 Maximum Allowable Case Temperature (Sinusoidal Waveform) 125 Max. Power Dissipation Per SCR - Watts 60 30 Max. Case Temperature - Tcase -C 180 120 115 0 180 360 CONDUCTION ANGLE 110 105 CONDUCTION ANGLE 100 30 60 90 180 120 50 55 60 95 0 5 10 15 20 25 30 35 40 45 Average On-State Current - It(av) - Amperes Maximum Allowable Case Temperature (Rectangular Waveform) 125 Maximum On-State Power Dissipation (Rectangular Waveform) 120 360 Max. Power Dissipation Per SCR - Watts 270 180 90 120 Max. Case Temperature - Tcase -C 100 120 115 110 105 100 30 95 90 85 60 90 120 180 270 360 0 180 360 80 60 30 40 15 CONDUCTION ANGLE 60 20 0 CONDUCTION ANGLE 180 360 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Revision Date: 11/1/2001 |
Price & Availability of CD431660
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |